Repair grease 125 ml
Reference:
XA 30203
€9.15
Tax included
Grease with the strongest repair properties. Contains a revitalizant. Recommended for bearings, units, and parts with wear up to 80%.
Product Details
| Reference |
XA 30203
|
| In stock |
1 Item
|
| Condition |
New
|
Description
Grease with the strongest repair properties. Contains a revitalizant. Recommended for bearings, units, and parts with wear up to 80%. Forms a new cermet protective coating on friction surfaces: parts increase in volume and restore their original geometry. Traditionally used to restore the functionality of worn wheel bearings, constant velocity joints (CV joints), and other loaded units. It can also be used to restore pump bearings, alternator bearings, universal joints, etc. Other applications: rolling and sliding bearings of various units and mechanisms in domestic and industrial use.
- Effectively dissipates heat from the friction zone
- Heals scuffs and microcracks
- Withstands high rotational speeds
- Reduces noise and vibration
- Compensates for 80% wear
- Eliminates corrosion and protects units from aggressive environments.
Application
- When using a grease gun: Inject the grease into the unit through the grease nipple until it appears from the gaps of the lubricated connection
- When using the aerosol can: Spray onto the part after cleaning it from dirt
- Manual application: Fill 1/2 of the free volume of the bearing (unit) with grease, having previously removed the old grease
- To restore the functionality of constant velocity joints (CV joints), it is necessary to replace the old grease with XADO Repair grease*
*Remove the protective boot, remove the old grease, remove the CV joint, disassemble it, having previously marked the relative position of all parts. Clean the parts (it is recommended to use XADO Universal Industrial Cleaner or VERYLUBE Conveyor Cleaner for cleaning). Assemble the CV joint, observing the relative position of the parts according to the marks. Completely fill the internal cavity of the CV joint with grease, install the protective boot, and put the CV joint back in place. Operate the vehicle until the defect is eliminated (disappearance of extraneous sounds during movement), but for no more than 5,000 km of mileage. After that, replace the XADO Repair grease with XADO grease for CV joints or the standard one. If the wear of the treated CV joint was significant, additional noise is possible during the first kilometers of operation. It is recommended to choose a driving mode where this noise is maximum, for example, on turns.
Notes
- The grease is effective for protection against current bearing wear (up to 10,000 min-1)
- Not recommended for new units and parts!
| Indicator | Value |
|---|---|
| Thickener | lithium |
| Color, visual | red |
| Consistency class according to NLGI | 3 |
| Penetration at +25 °C, ×10-1 mm | 250 |
| Density at 25 °C, kg/l | 0.97 |
| Evaporation at 120 °C, % | no more than 1.75 |
| Dropping point, °C | above + 186 |
| Operating temperature: long-term, °C short-term, °C |
no higher than 130 no higher than 150 |
| Tribological characteristics: welding load, N critical load, N wear index, mm |
more than 2195 more than 823 no more than 0.75 |
*typical indicators
Specifications and technologies
meets the requirements of specifications:
| NLGI 3 (ASTM D217) | ISO-L-XBCEB 3 (ISO 6743-9) |
| KP3K-20 (DIN 51502) |
Comments (0)
No customer reviews for the moment.
You might also like
Grease with the strongest repair properties. Contains a revitalizant. Recommended for bearings, units, and parts with wear up to 80%.