XADO-Oil 15w40 SL/CI 1L

XADO 15W-40 SL/CI-4 Engine Oil (Part No. XA 25113)

XADO 15W-40 SL/CI-4 Engine Oil (Part No. XA 25113) is a premium all-season mineral engine oil engineered for maximum protection of both modern high-performance diesel (SHPD) and gasoline engines used in passenger cars, commercial vehicles, and heavy-duty equipment. Its advanced additive package effectively neutralizes combustion by-products, prevents sludge and varnish formation, and ensures reliable engine performance under severe operating conditions.

Technical Specifications

• SAE Viscosity Grade: 15W-40
• Container Volume: 20 L
• Density at 20°C: 0.875 kg/L
• Kinematic Viscosity at 100°C: 14.5 mm²/s
• Kinematic Viscosity at 40°C: 107.0 mm²/s
• Viscosity Index: 140
• Flash Point: 225°C
• Pour Point: -30°C
• Total Base Number (TBN): 10.3 mg KOH/g

Compatibility

The oil is suitable for engines meeting Euro II, Euro III, and Euro IV emission standards that are not equipped with Diesel Particulate Filters (DPF). It meets the requirements of the following specifications:

• API: CI-4 / CH-4 / CG-4 / CF-4 / CF / SL
• ACEA: E7 / A3 / B4
• Global: DHD-1
• MB: 228.3 / 229.1
• MAN: M 3275
• Volvo: VDS-3 / VDS-2
• Renault: RLD-2 / RLD
• Mack: EO-N / EO-M Plus
• Cummins: CES 20071 / 20072 / 20076 / 20077 / 20078
• Caterpillar: ECF-1-a
• MTU: Type 2

Installation Instructions

• Change the engine oil while the engine is warm to ensure complete drainage and removal of contaminants.
• Drain the used oil by removing the drain plug and replace the oil filter with a new one.
• Fill the engine with the required amount of XA 25113 engine oil, checking the oil level with the dipstick.
• Start the engine and let it idle for several minutes. Check for leaks around the oil filter and drain plug.
• Switch off the engine, wait approximately 10 minutes, then recheck the oil level and top up if necessary.